How To Installing An Egress Window: Step By Step Guide For Homeowners

Installing an egress window can seem daunting, but with this comprehensive step-by-step guide, you’ll soon be on your way to having a safe and efficient window in no time! Find out the benefits of an egress window, what tools you need to have handy, and how to install one.

What is an Egress Window?

An egress window is a window that is installed to provide an emergency exit from a home or other building. Egress windows must meet the building code’s specific size and height requirements to be effective as an emergency exit. In most cases, egress windows must be installed in any room used as a bedroom, such as a guest room or child’s room.

Installing an egress window is not a difficult task, but there are some essential things to keep in mind. First, you need to ensure that the window’s location meets all the requirements set by your local building code. Second, you must choose a window that is the correct size and height for the space. Third, you must install the window according to the manufacturer’s instructions.

If you follow these steps, you can be sure that your egress window will provide a safe and effective emergency exit from your home.

Installing An Egress Window

Why You Need an Egress Window

If you’re planning on finishing your basement, you’ll need to install an egress window. An egress window is a window that is large enough for a person to climb through in the event of an emergency. Most basements don’t have windows, so adding an egress window is a necessary safety.

There are several benefits to having an egress window in your basement. First, it provides a way for people to escape if there is a fire or other emergency. Second, it adds natural light and ventilation to the space. Third, it can increase the value of your home.

Understanding the Building Codes

Building codes are put in place to protect homeowners and ensure their homes are safe. They are enforced by local building departments and dictate the minimum standards for construction. When it comes to installing an egress window, several code requirements must be met.

The International Residential Code (IRC) requires that every bedroom have an egress window in case of fire or another emergency. The window must be large enough for a person to climb through and be located near the sleeping area. It must also have a clear opening of at least 5.7 square feet.

In addition to the IRC, many states and municipalities have building codes. These codes may be more stringent than the IRC, so it’s important to check with your local building department before beginning any work.

Preparing the Room for Installation

The first step in preparing the room for installation is to remove any obstructions from the area where the window will be placed. This includes items such as beds, dressers, nightstands, and any other furniture. Once the area is clear, you will need to measure the rough opening of the space to ensure that the window you purchase will fit correctly.

Next, you will need to create a level surface for the window to sit on. This can be done by shimming the sill with 2x4s or plywood. The goal is to create a level surface flush with the surrounding wall so that the window can be installed evenly.

Once the surface is prepared, you can begin installing your egress window!

Step-by-Step Guide to Installing an Egress Window

Assuming you have already marked out the location of your egress window, the first step is to cut through the siding and sheathing. Be sure to wear safety glasses and a dust mask while doing this. Next, use a reciprocating saw to cut through the sill plate. Make sure you Cut perpendicular to the joists so that you have enough room to install the window.

Now it’s time to install the window well. First, excavate around the perimeter of the window well, being careful not to damage any utilities that may be in the way. Next, level off the bottom of the excavation and place your window well liner in position. If you’re using a pre-formed liner, you’ll need to set it in place and anchor it with stakes. If you’re using stones or bricks to form your liner, now is the time to lay them out in position. Once your liner is in place, fill it with gravel up to about 6 inches below the top edge.

The next step is to install your egress window. Set the window frame in position and shim it level before attaching it to the rough opening with screws or nails. Be sure to caulk around all four sides of the window before moving on. Now it’s time to finish up your window well by backfilling around it with dirt and adding any finishing touches like a grate or landscaping stones.

Installing an Egress Window
A.M. Shield Waterproofing Corp.

Tips For Installing an Egress Window

If you’re planning on installing an egress window in your home, there are a few things you’ll need to keep in mind. Here are some tips to help you through the process:

1. Determine where you want the window to be located. An egress window must be installed in an area that provides easy access to the outside in case of an emergency.

2. Choose a window that meets the size requirements for an egress window. The minimum size for an egress window is 24 inches by 20 inches.

3. Install a sill pan underneath the window to catch any water that may leak through.

4. Make sure the area around the window is clear of any debris or obstacles preventing someone from exiting through it in an emergency.

5. Test the window regularly to ensure it opens and closes properly.

Maintenance and Care of Your New Window

An egress window is an excellent addition to any home. Not only does it provide an emergency exit in the case of a fire, but it also allows for natural light and ventilation. But like any other window in your home, an egress window requires proper maintenance and care to keep it functioning properly.

Here are a few tips on how to properly maintain and care for your new egress window:

-Inspect the window regularly for any cracks or damage. If you notice any damage, repair it immediately to prevent further issues.

-Keep the area around the window clean and free of debris. This will help ensure that the window can open and close properly.

-Ensure the window is properly sealed to prevent air and water leaks. Check the sealant around the frame periodically and reapply as needed.

-If you have a screen on your egress window, make sure it is free of holes or tears. A damaged screen can allow insects and other pests into your home.

Also read: How To Tile a Bathroom Floor ─ Ultimate Guide 2023


Installing an egress window is a great way to add natural light, ventilation, and safety to your home. These steps will help ensure the installation process goes as smoothly as possible. In addition, it’s essential to make sure that you follow all local building codes when installing an egress window for it to be approved by authorities. If you have any questions or concerns about installing an egress window, contact a professional contractor who can assist with the installation of your window.

Leave a Comment